Description

This 33 piece kit services most American manufactured motorcycles. From battery service, cable and clutch adjustments, to gas tank and seat removal, this set covers roadside maintenance and emergency repairs. Set is conveniently organized and stored in a gas tank shape bag measuring 10" long, 5 1/2" wide, and 2 1/4" high and is small enough to fit almost anywhere.

Includes

• T72 Ratchet (1/4" drive)
• TM5 Sliding T-Handle (1/4" drive) - used with 1/4" drive sockets
• TMBS8A Magnet Bit Holder (1/4" drive)
• TMXK4 4" Long Knurled Extension (1/4" drive)
• TA3 1/4" drive Female to 3/8" drive Male Adapter
• S9706KRA 5/8" Spark Plug Socket (3/8" drive)
• S9704KA 13/16" Spark Plug Socket (3/8" drive)
• 1/4" Drive FLANK DRIVE® 6 Point Sockets
  • TM8 6 Point Socket (1/4")
  • TM10 6 Point Socket (5/16")
  • TM12 6 Point Socket (3/8") - cable adjustment
  • TM14 6 Point Socket (7/16") - saddlebag adjustment
  • TM16 6 Point Socket (1/2") - clutch cable, mirrors and pinch bolts
  • TM18 6 Point Socket (9/16") - belt adjustment and clutch cable
• SDM3708 Hex Bit (1/8") - Rear brake master cylinder
• SDM3710 Hex Bit (5/32") - handle bar controls
• SDM3712 Hex Bit (3/16") - miscellaneous covers
• SDM3714 Hex Bit (7/32") - clutch pressure plate adjustment
• SDM3716 Hex Bit (1/4")
• SDMA4720 Hex Bit (5/16") - air cleaner cover and filter, rear passenger foot plate, brake caliper remover
• SDMA4724 Hex Bit (3/8") - for transmission dip stick
• SDMTA45 TORX® Bit (T45) - rear rotors
• SDMTA40 TORX® Bit (T40) - gas tank removal, primary drain plug removal and battery hold down
• SDMT420 TORX® Bit (T20)
• SDMT427 TORX® Bit - outer fairing, ignition switch cap and housing, control lever fasteners, derby cover housing and chain cover inspection
• SDMT425 TORX® Bit (T25) - used on switches plus clutch and derby covers
• SDMT430 TORX® Bit (T30) - used on switches plus clutch and derby covers
• SDMT415 TORX® Bit (T15) - handle bars
• SDM522A Phillips® Bit (#2) - mirrors, master cylinder, ignition switch button, seat removal, turn signal light lens and head light replacement
• SDM516A Small Slotted Bit - mirrors, master cylinder, ignition switch button, seat removal, turn signal light lens and head light replacement
• SDM519A Large Slotted Bit - miscellaneous adjustments
• FB361A Spark Plug Gap Tool - fractional sizes .020" to .1"
• OEXM10B Battery Cable Wrench (10mm)
• GAJ8A Adjastable Wrench (8") - various applications
• PAK562430 Kit Bag - conveniently organized and stored in a gas tank shape bag measuring 10" long, 5 1/2" wide, and 2 1/4" high and is small enough to fit almost anywhere

 Warranty

Warranted for defects in material and workmanship only.